Aztech DSL605EW

.
DSL2+ Wireless 4-Port Router

Click Here to Gallery

The Aztech DSL605EW ADSL2+ Wireless 4 Port Router uses new generation Texas Instruments AR7 with 1350A for wireless combined Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite), ADSL standard. The ADSL2+ Wireless 4-Port Router also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, and Extended Reach-ADSL support. This next generation ADSL2+ Wireless 4-Port Router will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

The Aztech DSL605EW ADSL2+ Wireless LAN 4 Port Ethernet Router is targeted at the residential and SOHO users. Designed for high speed broadband networks, the ADSL2+ Wireless 4-Port Router is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Managed Switch for future IPTV deployment, high speed 125Mbps IEEE802.11b/g/g++ Wireless LAN Access point and true firewall capability functionality.

Security for the Aztech DSL605EW ADSL2+ Wireless 802.11g++ Router is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS
ADSL/ATM SUPPORT
- ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
- G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
- Rate Adaptive modem at 32 Kbps steps
- Dynamic Adaptive Equalization to improve Carrier's service area
- Bridge Tap Mitigation support
- ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
- AAL ATM Attributes - AAL5
- Supports 8 multiple PVC (up to 16 PVC Bridge Support)
- Spectral compatibility with POTS
- F4 & F5 OAM Loopback/Send and Receive
- TR-067 compliant

ENCAPSULATION SUPPORT
- RFC2364 PPPoA Client support
- RFC2516 PPPoE Client support
- RFC2225/RFC1577 Classical IP Support
- Transparent Bridge Support
- PAP/CHAP/MS-CHAP for Password Authentication Support

NETWORK SUPPORT
- Static IP, Dynamic RIP routing support
- IP/TCP/UDP/ICMP/ARP/RARP Application Support
- Network Address Translation (NAT)
- Port Mapping/Forwarding/Triggering
- Easy setup of Port Forwarding rules for popular Games/Application
- NAT Application Level Gateway for popular applications
- DHCP Server/Relay/client
- DNS Relay Agent
- DMZ support
- PVC to VLAN Mapping
- Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
- PPP Always on with configurable timeout
- PPP Dial on Demand
- Universal Plug and Play Support
- SNMP v1 and v2
- Multi NAT support
- Easy Connect Support
- DDNS (Dynamic DNS) Support
- IGMP Proxy Support (IGMP v1 and v2)
- SNTP Support
- QoS Support (DSCP, TOS)
- PPP/DHCP Auto Detection

WLAN SUPPORT
- IEEE 802.11, 802.11b and 802.11g compliant
- Supports 802.11b, 802.11g and 802.11g++ simultaneously
- Transmit output power up to 20dBm (standard)
- Transmit output power up to 23dBm with change to 5V high-power 1350A daughter board
- Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard
- Support seamless WLAN roaming
- Frequency Band :
> 2412 MHz - 2462 MHz (North America/FCC)
> 2412 MHz - 2472 MHz (ETSI/Europe)
> 2412 MHz - 2484 MHz (Japan)
> 2457 MHz - 2472 MHz (France)
> 2457 MHz - 2462 MHz (Spain)
- Support Direct Sequence Spread Spectrum (DSSS) technology
- Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
- Wireless Media Access Protocol- CSMA/CA with ACK
- 64/128/256Bit WEP Encryption
- WPA/WPA2 Support
- Dynamic Rate Scaling from 125, 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
- Operating Range of >300 Meters (Open Air)
- Extended Range with 802.11g++ support
- WDS Support (Wireless Distribution System)
- Multiple SSID Support

MANAGEMENT SUPPORT
- Web Based HTTP management GUI
- TFTP/FTP Support for Firmware Upgrade
- Web Based Firmware Upgrade (Local)
- Soft Factory Reset Button via Web GUI
- Diagnostic Test (DSL, OAM, Network, Ping Test)
- TR068 - WAN Access
- Telnet/CLI (Read and Write)
- Syslog Support
- Firmware upgrade-able for future feature enhancement
- TR-069 Support with firmware upgrade
- SNMP trap

SECURITY SUPPORT
- NAT for basic Firewall support
- Packet Filtering Firewall Support
- Stateful Packet Inspection Support
- Protection against Denial of Service attacks
- Password Authentication to Modem
- Two-Level Password protection

HARDWARE
- Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset
- IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)
- Texas Instrument TNETW1350A based IEEE802.11b/g Daughter Board
- 4 MB Flash ROM
- 16 MB SDRAM
- Dying Gasp Support
- ITU K.21 Support
- GDT Support

PLATFORM SUPPORT
- For Ethernet and Wireless LAN (OS Independent)

POWER REQUIREMENTS
- Input Voltage : 9V DC +/- 10%
- Input Current : 1.0A

PHYSICAL SPECIFICATIONS
LED Indicators :
- 1 x "Power" LED (Green and Red LED)
- 4 x Ethernet Link Status (Green) LED
- 1 x "Wireless" LAN Link/Activity Status (Green) LED
- 1 x "DSL" Status (Green) LED
- 1 x "Internet" Status (Green and Red) LED
External Connectors :
- 1 x RJ-11 Telephone socket for ADSL line
- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Power Switch
- 2 x 360° Rotate-able 2.4Ghz 3 dBi Antenna (deachable)
Measurements :
- Dimension : 156MM x 135MM x 34MM
- Weight : Approx. 250 g